A webinar presented by the International Fluid Power Society on the prevention and management of fluid injection injuries cites a study by Snarski and Birkhahn, two emergency department doctors at the New York Methodist Hospital. And it contains some sobering statistics:
Fluid injection injuries are relatively rare with around 600 incidences in North America per year. That’s the good news. … Read more
While doing some fact checking for a consulting job, I had cause to review Australian Standard AS 2671-2002; Hydraulic Fluid Power-General Requirements for Systems. This Australian Standard is basically the International Standard, ISO 4413 with some amendments based on the local advisory committee’s input.
One of these amendments has to do with pump suction strainers. Section 8.3.3 of ISO 4413:2010, … Read more
One of the advantages of variable-displacement pumps with hydraulic or electro-hydraulic displacement control, or load-sensing control, is their low standby pressure. Meaning, when pump output isn’t required, the pump ‘stands by’ at a relatively low pressure, and usually at zero flow (other than that necessary for the make-up of internal leakage).
From an efficiency (heat-load) perspective, the lower this standby … Read more