If you’ve worked with hydraulic equipment for any length of time, it’s likely that you’ve come across a hydraulic system with cloudy oil.
Oil becomes cloudy when it’s contaminated with water above its saturation level. The saturation level is the amount of water that can dissolve in the oil’s molecular chemistry and is typically 200 to 300 ppm at 68°F … Read more
There are generally only two conditions which necessitate an oil change. One of these is oxidative degradation. And the only way to know if the oil’s life has expired based on this condition is to do regular oil analysis.
A hydraulic oil’s oxidative condition is determined by an absolute measure of its total acid concentration. When oxygen combines with hydrocarbon … Read more
When positioning an air blast oil cooler, it should be situated so that it is at least half the fan diameter clear of any obstructions on both sides of the core. I recommend connecting the cooler so that oil flows from bottom to top, or if the tanks are on the sides, from lower connection (inlet) to upper connection (outlet). … Read more